A-29
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Appendix A Cisco ME 3800X and ME 3600X Switch Boot Loader Commands
set_param
set_param
To write system parameters to the system flash memory, use the set_param command in boot loader
mode.
set_param
Syntax Description This command has no arguments or keywords.
Command Modes Boot loader
Command History
Examples This example shows how to write system parameters to system flash memory.
Switch: set_param
Release Modification
12.2(52)EY This command was introduced.
To Next Page
Loading...
Need help?
General