-49
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show env
show env
To display alarm contact, fan, temperature, and power information for the switch, use the show env
command in user EXEC mode.
show env {alarm-contact | all | fan | power| temperature [status]} [ | {begin | exclude | include}
expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines You can use the show env temperature status command to display the switch temperature status. The
command output shows the temperature state as green or red and shows the shutdown and alert
thresholds. The output from the show env all command also includes this information.
For more information about the threshold levels, see the software configuration guide for this release.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
alarm-contact Displays alarm contact status.
all Displays fan, temperature, power supply, and alarm status.
fan Displays the switch fan status, including the power-supply fan.
power Displays the switch power-supply status.
temperature Displays the switch temperature status as GREEN or RED.
status (Optional) Shows more detailed temperature status, including the temperature
value, state (green, yellow, or red), and the yellow and red threshold values.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.
To Next Page
Loading...
Need help?
General