Cisco ME 3600X

-48
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show diagnostic
___________________________________________________________________________
5) TestFpga ------------------------> U
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 0
Last test execution time ----> n/a
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> n/a
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________________
Related Commands Command Description
diagnostic monitor Configures the health-monitoring diagnostic test.
diagnostic schedule test Sets the scheduling of test-based online diagnostic testing.
diagnostic start test Starts the online diagnostic test.