-34
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
spanning-tree mst forward-time
spanning-tree mst forward-time
To set the forward-delay time for all multiple spanning-tree (MST) instances, use the spanning-tree mst
forward-time command in global configuration mode. The forwarding time specifies how long each of
the listening and learning states last before the interface begins forwarding. To return to the default
setting, use the no form of this command.
spanning-tree mst forward-time seconds
no spanning-tree mst forward-time
Syntax Description
Defaults The default is 15 seconds.
Command Modes Global configuration
Command History
Usage Guidelines Changing the spanning-tree mst forward-time command affects all spanning-tree instances.
You can verify your setting by entering the show spanning-tree mst privileged EXEC command.
Examples This example shows how to set the spanning-tree forwarding time to 18 seconds for all MST instances:
Switch(config)# spanning-tree mst forward-time 18
Related Commands
seconds Length of the listening and learning states. The range is 4 to 30 seconds.
Release Modification
12.2(52)EY This command was introduced.
Command Description
show spanning-tree mst Displays MST information.
spanning-tree mst hello-time Sets the interval between hello bridge protocol data units (BPDUs)
sent by root switch configuration messages.
spanning-tree mst max-age Sets the interval between messages that the spanning tree receives
from the root switch.
spanning-tree mst max-hops Sets the number of hops in a region before the BPDU is discarded.
To Next Page
Loading...
Need help?
General