Cisco ME 3600X User Manual

-35
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show controllers bits
show controllers bits
To display the state of the Building Integrated Timing Supply (BITS) clock controller, use the show
controllers bits in privileged EXEC mode.
show controllers bits [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is a partial output example from the show controllers bits command:
Switch# show controllers BITS
Applique type is T1
Line Coding is B8ZS(Rx), B8ZS(Tx)
Framing is ESF(Rx), ESF(Tx)
Line Build Out is 0-133ft
No alarms detected.
Related Commands
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.
Command Description
controllers bits input
applique
Sets the BITS clock input link type and characteristics.
controllers bits output
applique
Sets the BITS clock output link type and characteristics.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English