Cisco ME 3600X User Manual

-97
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show logging onboard
show logging onboard
To display the on-board failure logging (OBFL) information, use the show logging onboard command
in privileged EXEC mode.
show logging onboard [module [slot-number]] [clilog | environment | message |temperature |
uptime | voltage] [continuous | detail | summary] [start hh:mm:ss day month year] [end
hh:mm:ss day month year]} [ | {begin | exclude | include} expression]
Syntax Description
Defaults There is no default.
Command Modes Privileged EXEC
Command History
module [slot-number] (Optional) The module slot number is always 1 and is not relevant for
the switch.
clilog Displays the OBFL CLI commands that were entered on the switch.
environment Displays the unique device identifier (UDI) information for the switch
and for all the connected devices: the product identification (PID), the
version identification (VID), and the serial number.
message Displays the hardware-related system messages generated by the
switch.
temperature Displays the temperature of the switch.
uptime Displays the time when the switch starts, the reason the switch restarts,
and the length of time the switch has been running since it last
restarted.
voltage Displays the system voltages of the switch.
continuous (Optional) Displays the data in the continuous file. For more
information, see the “Usage Guidelines” section.
summary (Optional) Displays the data in the summary file. For more information,
see the “Usage Guidelines” section.
start hh:mm:ss day month
year
(Optional) Displays the data from the specified time and date. For more
information, see the “Usage Guidelines” section.
end hh:mm:ss day month year
(Optional) Displays the data up to the specified time and date. For more
information, see the “Usage Guidelines” section.
detail (Optional) Displays both the continuous and summary data.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(52)EY This command was introduced.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English