Cisco ME 3600X

-63
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show flowcontrol
This is an example of output from the show flowcontrol interface interface-id command:
Switch> show flowcontrol interface gigabitethernet0/2
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
--------- -------- -------- -------- -------- ------- -------
Gi0/2 desired off off off 0 0
Related Commands Command Description
flowcontrol Sets the receive flow-control state for an interface.