2-137
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
lacp system-priority
Examples This example shows how to set the LACP system priority:
Switch(config)# lacp system-priority 20000
Related Commands Command Description
channel-group Assigns an Ethernet port to an EtherChannel group.
lacp port-priority Configures the LACP port priority.
show lacp sys-id Displays the system identifier that is being used by LACP.
To Next Page
Loading...
Need help?
General