2-188
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
network-clock input-source
Example 2 - BITS as Clock Source
The following example shows how to configure BITS as the network clock input source.
Switch(config)# network-clock input-source 1 external 1/0/0 e1 ?
cas E1 Channel Associated Signal Mode
crc4 E1 With CRC4 Signal Mode
fas E1 Frame Alignment Signal Mode
Related Commands Command Description
show network-clocks Displays network clock configuration.
show network-clock
synchronization
Displays network clock configuration.
controller BITS
commands
Configures the BITS clock controller characteristics.