Cisco ME 3600X User Manual

2-2
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
action
Examples This example shows how to identify and apply a VLAN access map vmap4 to VLANs 5 and 6 that causes
the VLAN to forward an IP packet if the packet matches the conditions defined in access list al2:
Switch(config)# vlan access-map vmap4
Switch(config-access-map)# match ip address al2
Switch(config-access-map)# action forward
Switch(config-access-map)# exit
Switch(config)# vlan filter vmap4 vlan-list 5-6
Related Commands Command Description
access-list {deny | permit} Configures a standard numbered ACL.
ip access-list Creates a named access list.
mac access-list extended Creates a named MAC address access list.
match (access-map
configuration)
Defines the match conditions for a VLAN map.
show vlan access-map Displays the VLAN access maps created on the switch.
vlan access-map Creates a VLAN access map.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English