Cisco ME 3600X

-53
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show errdisable detect
mac-limit Enabled port
pagp-flap Enabled port
port-mode-failure Enabled port
pppoe-ia-rate-limit Enabled port
psecure-violation Enabled port
security-violation Enabled port
sfp-config-mismatch Enabled port
storm-control Enabled port
udld Enabled port
vmps Enabled port
Note Though visible in the output, the dtp-flap and arp-inspection fields are not valid.
Related Commands Command Description
errdisable detect cause Enables error-disable detection for a specific cause or all causes.
show errdisable flap-values Displays error condition recognition information.
show errdisable recovery Displays error-disable recovery timer information.
show interfaces status Displays interface status or a list of interfaces in an error-disabled
state.