Cisco ME 3600X User Manual

-77
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show interfaces transceiver
Examples This is an example of output from the show interfaces interface-id transceiver properties command:
Switch# show interfaces gigabitethernet0/1 transceiver properties
Diagnostic Monitoring is not implemented.
Name : Gi0/1
Administrative Speed: auto
Administrative Duplex: auto
Administrative Auto-MDIX: on
Administrative Power Inline: N/A
Operational Speed: 1000
Operational Duplex: full
Operational Auto-MDIX: on
Media Type: 10/100/1000BaseTX SFP
This is an example of output from the show interfaces transceiver dom-supported-list command:
Switch# show interfaces transceiver dom-supported-list
Transceiver Type Cisco p/n min version
supporting DOM
------------------ -------------------------
DWDM GBIC ALL
DWDM SFP ALL
RX only WDM GBIC ALL
DWDM XENPAK ALL
DWDM X2 ALL
DWDM XFP ALL
CWDM GBIC NONE
CWDM X2 ALL
CWDM XFP ALL
XENPAK ZR ALL
X2 ZR ALL
XFP ZR ALL
Rx_only_WDM_XENPAK ALL
XENPAK_ER 10-1888-03
X2_ER ALL
XFP_ER ALL
XENPAK_LR 10-1838-04
X2_LR ALL
<output truncated>
This is an example of output from the show interfaces transceiver threshold-table command. Note that
these are thresholds programmed into IOS software, and are NOT used to determine alarms.
Optical Tx Optical Rx Temp Laser Bias Voltage
current
------------- ------------- ------ ------------ ---------
DWDM GBIC
Min1 -0.50 -28.50 0 N/A 4.50
Min2 -0.30 -28.29 5 N/A 4.75
Max2 3.29 -6.69 60 N/A 5.25
Max1 3.50 6.00 70 N/A 5.50
DWDM SFP
Min1 -0.50 -28.50 0 N/A 3.00
Min2 -0.30 -28.29 5 N/A 3.09
Max2 4.30 -9.50 60 N/A 3.59
Max1 4.50 9.30 70 N/A 3.70
RX only WDM GBIC
Min1 N/A -28.50 0 N/A 4.50
Min2 N/A -28.29 5 N/A 4.75
Max2 N/A -6.69 60 N/A 5.25
Max1 N/A 6.00 70 N/A 5.50
DWDM XENPAK
Min1 -1.50 -24.50 0 N/A N/A

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English