Cisco ME 3600X

-100
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show logging onboard
05/13/2006 07:25:24 36 -- -- -- -- -- -- -- -- -- -- --
05/13/2006 08:25:24 35 -- -- -- -- -- -- -- -- -- -- --
<output truncated>
This is an example of output from the show logging onboard uptime summary command:
Switch# show logging onboard uptime summary
--------------------------------------------------------------------------------
UPTIME SUMMARY INFORMATION
--------------------------------------------------------------------------------
First customer power on : 03/01/1993 00:03:50
Total uptime : 0 years 0 weeks 3 days 21 hours 55 minutes
Total downtime : 0 years 0 weeks 0 days 0 hours 0 minutes
Number of resets : 2
Number of slot changes : 1
Current reset reason : 0x0
Current reset timestamp : 03/01/1993 00:03:28
Current slot : 1
Current uptime : 0 years 0 weeks 0 days 0 hours 55 minutes
--------------------------------------------------------------------------------
Reset | |
Reason | Count |
--------------------------------------------------------------------------------
No historical data to display
--------------------------------------------------------------------------------
This is an example of output from the show logging onboard voltage summary command:
Switch# show logging onboard voltage summary
--------------------------------------------------------------------------------
VOLTAGE SUMMARY INFORMATION
--------------------------------------------------------------------------------
Number of sensors : 8
Sampling frequency : 60 seconds
Maximum time of storage : 3600 minutes
--------------------------------------------------------------------------------
Sensor | ID | Maximum Voltage
--------------------------------------------------------------------------------
12.00V 0 12.567
5.00V 1 5.198
3.30V 2 3.439
2.50V 3 2.594
1.50V 4 1.556
1.20V 5 1.239
1.00V 6 0.980
0.75V 7 0.768
--------------------------------------------------------------------------------
Nominal Range Sensor ID
--------------------------------------------------------------------------------
No historical data to display
--------------------------------------------------------------------------------
Related Commands Command Description
clear logging onboard Removes the OBFL data in the flash memory.
hw-module module logging onboard Enables OBFL.