Cisco ME 3600X

-127
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show network-clocks
System Clock State is Automatic
---------------------------------------------------------------
hold-timeout : infinite
ESMC/SSM workaround using REP not configured
---------------------------------------------------------------
Measured offset freq for input BITS is +483.87ppm (3.8 ppm resolution)
Measured offset freq for input Te0/1 is +0.0ppm (3.8 ppm resolution)
Measured offset freq for input Te0/2 is +0.0ppm (3.8 ppm resolution)
Measured offset freq for current path (T4 DPLL) is Not Available
Related Commands Command Description
network-clock-select Configures the network clock for the switch..
set network-clocks Set SyncE clock selection on the switch.