Cisco ME 3600X

-136
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
show port-type
Gi0/10 1 Network Node Interface (nni)
Gi0/11 testwhelshdevice 1 Network Node Interface (nni)
Gi0/12 1 Network Node Interface (nni)
Gi0/13 trunk Network Node Interface (nni)
Gi0/14 1 Network Node Interface (nni)
Gi0/15 1 Network Node Interface (nni)
Gi0/16 1 Network Node Interface (nni)
Gi0/17 1 Network Node Interface (nni)
Gi0/18 1 Network Node Interface (nni)
Gi0/19 1 Network Node Interface (nni)
Gi0/20 1 Network Node Interface (nni)
Gi0/21 1 Network Node Interface (nni)
Gi0/22 1 Network Node Interface (nni)
Gi0/23 1 Network Node Interface (nni)
Gi0/24 1 Network Node Interface (nni)
Te0/1 1 Network Node Interface (nni)
Te0/2 1 Network Node Interface (nni)
This is an example of output from the show port-type command using other keywords:
Switch# show port-type nni | exclude Gigabitethernet0/1
Port Name Vlan Port Type
--------- ------------------ ---------- ----------------------------
Gi0/2 1 Network Node Interface (nni)
Related Commands Command Description
port-type Sets the interface type for a port, but all ports are NNIs.