-9
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
snmp-server host
notification-type (Optional) Type of notification to be sent to the host. If no type is specified, all
notifications are sent.
• alarms—Sends SNMP alarms traps.
• auth-framework—Sends NMP CISCO-AUTH-FRAMEWORK-MIB traps.
• bgp—Sends Border Gateway Protocol (BGP) state change traps. This
keyword is valid only when the metro IP access image is installed on the
switch.
• bridge—Sends SNMP Spanning Tree Protocol (STP) bridge MIB traps.
• cef—Sends cef traps.
• config—Sends SNMP configuration traps.
• copy-config—Sends SNMP copy configuration traps.
• config-ctid —Sends SNMP config-ctid traps.
• cpu threshold—Allows CPU-related traps.
• eigrp—Sends SNMP EIGRP traps
• entity— Sends SNMP entity traps.
• envmon—Sends environmental monitor traps.
• ethernet-cfm—Sends SNMP Ethernet CFM traps.
• flash—Sends SNMP FLASH notifications.
• hsrp—Sends SNMP Hot Standby Router Protocol (HSRP) traps.
• ipmulticast—Sends SNMP IP multicast routing traps.
• isis—Sends IS-IS traps.
• license—Sends license traps.
• mac-notification—Sends SNMP MAC notification traps.
• mpls-fast-reroute—Sends SNMP MPLS traffic engineering fast reroute
traps.
• mpls-ldp—Sends SNMP MPLS label distribution protocol traps.
• mpls-traffic-eng—Sends SNMP MPLS traffic engineering traps.
• mpls-vpn—Sends SNMP MPLS Virtual Private Network traps.
• msdp—Sends SNMP Multicast Source Discovery Protocol (MSDP) traps.
• ospf—Sends Open Shortest Path First (OSPF) traps.
• pim—Sends SNMP Protocol-Independent Multicast (PIM) traps.
• rtr—Sends SNMP Response Time Reporter traps.
• snmp—Sends SNMP-type traps.
• stpx—Sends SNMP STP extended MIB traps.
• syslog—Sends SNMP syslog traps.
• tty—Sends TCP connection traps.
• vlan-membership— Sends SNMP VLAN membership traps.
• vlancreate—Sends SNMP VLAN-created traps.
• vlandelete—Sends SNMP VLAN-deleted traps.
To Next Page
Loading...
Need help?
General