Cisco ME 3600X User Manual

-81
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter
udld
• The no udld port interface configuration command followed by the udld port or udld port
aggressive interface configuration command to re-enable UDLD on the specified interface
• The errdisable recovery cause udld and errdisable recovery interval interval global
configuration commands to automatically recover from the UDLD error-disabled state
You can verify your setting by entering the show udld privileged EXEC command.
Examples This example shows how to enable UDLD on all fiber-optic interfaces:
Switch(config)# udld enable
Related Commands Command Description
show udld Displays UDLD administrative and operational status for all ports
or the specified port.
udld port Enables UDLD on an individual interface or prevents a fiber-optic
interface from being enabled by the udld global configuration
command.
udld reset Resets all interfaces shut down by UDLD and permits traffic to
again pass through.

Cisco ME 3600X Specifications

General

Brand	Cisco
Model	ME 3600X
Category	Switch
Language	English