2-73
Cisco ME 3800X and ME 3600X Switch Command Reference
OL-28238-01
Chapter 2 Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
ethernet lmi
When the switch is configured as an Ethernet LMI CE device, these interface configuration commands
and keywords are visible, but not supported:
• service instance
• ethernet uni
• ethernet lmi t392
Examples This example shows how to configure the switch as an Ethernet LMI CE device:
Switch(config)# ethernet lmi global
Switch(config)# ethernet lmi ce
Related Commands Command Description
ethernet lmi interface
configuration command
Enables Ethernet LMI for a user-network interface.
To Next Page
Loading...
Need help?
General