Contents
vii
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
OL-7827-12
How to Remove the Current Time Zone Setting 5-61
Configuring Daylight Saving Time 5-61
Options 5-61
Guidelines 5-62
How to Define Recurring Daylight Saving Time Transitions 5-63
How to Define Non-Recurring Daylight Saving Time Transitions 5-63
How to Cancel the Daylight Saving Time Configuration 5-63
How to Display the Current Daylight Saving Time Configuration 5-64
Configure SNTP 5-64
How to Enable the SNTP Multicast Client 5-64
How to Disable the SNTP Multicast Client 5-65
How to Enable the SNTP Unicast Client 5-65
Options 5-65
Enabling SNTP Unicast Client: Example 5-65
How to Disable the SNTP Unicast Client 5-65
How to Disable the SNTP Unicast Client and Remove All Servers 5-65
How to Remove One SNTP Server 5-66
How to Define the SNTP Unicast Update Interval 5-66
Options 5-66
Defining the SNTP Unicast Update Interval: Example 5-66
How to Display SNTP Information 5-66
Displaying SNTP Information: Example 5-67
Configuring Domain Name Server (DNS) Settings 5-67
Configuring DNS Lookup 5-67
How to Enable DNS Lookup 5-68
How to Disable DNS Lookup 5-68
Configuring Name Servers 5-68
Options 5-68
How to Define Domain Name Servers 5-68
How to Remove a Domain Name Server 5-69
How to Remove All Domain Name Servers 5-69
Adding a Host to the Host Table 5-69
Options 5-69
Adding Hosts to Removing them from the Host Table: Examples 5-69
How to Display Current DNS Settings 5-70
Displaying Current DNS Settings: Example 5-70
Configuring the Management Port Physical Parameters 5-70
Configuring the Management Interface Speed and Duplex Parameters 5-70
How to Configure the Duplex Operation of the Management Interface 5-71
To Next Page
Loading...
