DES-3000 Series Layer 2 Switch CLI Reference Manual
config 802.1p default_priority
Purpose Used to assign an 802.1p priority tag to an incoming untagged
packet that has no 802.1p priority tag.
Syntax
config 802.1p default_priority [<portlist> | all] <priority 0-7>
Description
The config 802.1p default_priority command allows specification
of the 802.1p priority value an untagged, incoming packet will be
assigned before being forwarded to its destination.
Parameters
<portlist> − Specifies a port or range of ports to be configured.
all − Specifies that the config 802.1p default_priority command
will be applied to all ports on the Switch.
<priority 0-7> − Specifies the 802.1p priority value that an untagged,
incoming packet will be given before being forwarded to its
destination.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure 802.1p default priority on the Switch:
DES-3026:4#config 802.1p default_priority all 5
Command: config 802.1p default_priority all 5
Success.
DES-3026:4#
104
To Next Page