DES-3000 Series Layer 2 Switch CLI Reference Manual
Command: enable snmp traps
Success.
DES-3026:4#
disable snmp traps
Purpose Used to disable SNMP trap support on the Switch.
Syntax
disable snmp traps
Description This command is used to disable SNMP trap support on the
Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To prevent SNMP traps from being sent from the Switch:
DES-3026:4#disable snmp traps
Command: disable snmp traps
Success.
DES-3026:4#
enable snmp authenticate trap
Purpose Used to enable SNMP authentication trap support.
Syntax
enable snmp authenticate trap
Description This command is used to enable SNMP authentication trap
support on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To turn on SNMP authentication trap support:
DES-3026:4#enable snmp authenticate trap
Command: enable snmp authenticate trap
Success.
DES-3026:4#
disable snmp authenticate trap
Purpose Used to disable SNMP authentication trap support.
45
To Next Page
Loading...
