DES-3000 Series Layer 2 Switch CLI Reference Manual
Example usage:
To download firmware:
DES-3026:4#download sim_ms firmware 10.53.13.94 c:/dgssri.had members all
Command: download sim_ms firmware 10.53.13.94 c:/dgssri.had members all
2 00-07-06-05-04-03 Success
This device is updating firmware. Please wait...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-01-02-03-04-00 Success
3 00-07-06-05-04-03 Success
DES-3026:4#
To download configuration files:
DES-3026:4#download sim_ms configuration 10.53.13.94 c:/dgssri.txt members all
Command: download sim_ms configuration 10.53.13.94 c:/dgssri.txt members all
This device is updating configuration. Please wait...
Download Status :
ID MAC Address Result
--- ----------------- ----------------
1 00-01-02-03-04-00 Success
2 00-07-06-05-04-03 Success
3 00-07-06-05-04-03 Success
DES-3026:4#
upload sim_ms
Purpose Used to upload a configuration file to a TFTP server from a specified
member of a SIM group.
Syntax
upload sim_ms [configuration_to_tftp | log_to_tftp] <ipaddr>
<path_filename> {members <mslist> | all}
Description This command will upload a configuration file to a TFTP server from a
specified member of a SIM group.
configuration_to_tftp - Specify this parameter to upload a switch
configuration file to a TFTP server.
log_to_tftp - Specify this parameter to upload a switch log file to a
TFTP server.
<ipaddr> - Enter the IP address of the TFTP server to which to upload
a configuration file.
<path_filename> – Enter a user-defined path and file name on the
TFTP server to which to upload configuration files.
members – Enter this parameter to specify the members from which
to upload a log file or switch configuration file. The user may specify a
Parameters
207
To Next Page
Loading...
