DES-3000 Series Layer 2 Switch CLI Reference Manual
clear counters
Purpose Used to clear the Switch’s statistics counters.
Syntax
clear counters [ports <portlist>]
Description This command will clear the counters used by the Switch to compile
statistics.
Parameters
<portlist> − Specifies a port or range of ports to be cleared for
statistics.
Restrictions Only administrator-level users can issue this command.
Example usage:
To clear the counters:
DES-3026:4#clear counters
Command: clear counters
Success.
DES-3026:4#
clear log
Purpose Used to clear the Switch’s history log.
Syntax
clear log
Description This command will clear the Switch’s history log.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To clear the log information:
DES-3026:4#clear log
Command: clear log
Success.
DES-3026:4#
63
To Next Page
Loading...
