DES-3000 Series Layer 2 Switch CLI Reference Manual
smtp send_testmsg
Purpose Used to send a test message to mail recipients configured on the
Switch.
Syntax
smtp send_testmsg
Description This command is used to send test messages to all mail recipients
configured on the Switch, thus testing the configurations set and
the reliability of the SMTP server.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To send a test mail message to all configured mail recipients.
DES-3026:4# smtp send_testmsg
Command: smtp send_testmsg
Subject: This is a SMTP test.
Content: Hello everybody!!
Sending mail, please wait…
Success.
DES-3026:4#
53
To Next Page
Loading...
