DES-3000 Series Layer 2 Switch CLI Reference Manual
show igmp_snooping
Purpose Used to show the current status of IGMP snooping on the Switch.
Syntax
show igmp_snooping {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping configuration on the
Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which to view the IGMP
snooping configuration.
Restrictions None.
Example usage:
To show igmp snooping:
DES-3026:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Route Timeout : 260
State : Disabled
Total Entries: 1
Multicast router Only : Disabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
Multicast fast leave : Disabled
DES-3026:4#
show igmp_snooping group
Purpose Used to display the current IGMP snooping group configuration on the
Switch.
Syntax
show igmp_snooping group {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping group configuration
on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN for which to view IGMP snooping
group configuration information.
Restrictions None.
Example usage:
To show igmp snooping group:
147
To Next Page
Loading...
