DES-3000 Series Layer 2 Switch CLI Reference Manual
show lacp_port
Purpose
Used to display current LACP port mode settings.
Syntax
show
lacp_port {<portlist>}
Description
This command will display the LACP mode settings as they are
currently configured.
Parameters
<portlist> - Specifies a range of ports that will be viewed.
Restrictions
None.
Example usage:
To display LACP port mode settings:
DES-3026:4#show lacp_port 1-11
Command: show lacp_port 1-11
Port Activity
------ --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Passive
8 Passive
9 Passive
10 Passive
11 Passive
DES-3026:4#
128
To Next Page
Loading...
