D-Link DES-3026 - Switch - Traffic Segmentation Commands

DES-3000 Series Layer 2 Switch CLI Reference Manual
14
TRAFFIC SEGMENTATION COMMANDS
Traffic segmentation allows you to further sub-divide VLANs into smaller groups of ports that will help to reduce traffic on the
VLAN. The VLAN rules take precedence, and then the traffic segmentation rules are applied. The traffic segmentation
commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
Command Parameters
config traffic_segmentation [<portlist>] forward_list [null | <portlist>]
show traffic_segmentation {<portlist>}
Each command is listed, in detail, in the following sections.
113