DES-3000 Series Layer 2 Switch CLI Reference Manual
disable sntp
Purpose Disables SNTP server support.
Syntax
disable sntp
Description This will disable SNTP support. SNTP service must be separately configured
(see config sntp).
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example:
To stop SNTP support:
DES-3026:4#disable sntp
Success.
Command: disable sntp
DES-3026:4#
config time
Purpose Used to manually configure system time and date settings.
Syntax
config time date <date ddmmmyyyy> <time hh:mm:ss>
Description This will configure the system time and date settings. These will be
overridden if SNTP is configured and enabled.
Parameters date – Express the date using two numerical characters for the day of the
month, three alphabetical characters for the name of the month, and four
numerical characters for the year. For example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is, two
numerical characters each for the hour using a 24-hour clock, the minute
and second. For example: 19:42:30.
Restrictions Only administrator-level users can issue this command. Manually
configured system time and date settings are overridden if SNTP support is
enabled.
Example usage:
To manually set system time and date settings:
DES-3026:4#config time 30062003 16:30:30
Command: config time 30062003 16:30:30
Success.
DES-3026:4#
187
To Next Page
Loading...
Need help?
General
