DES-3000 Series Layer 2 Switch CLI Reference Manual
show port_security
Purpose Used to display the current port security configuration.
Syntax
show
port_security {ports <portlist>}
Description This command is used to display port security information of the
Switch ports. The information displayed includes port security admin
state, maximum number of learning address and lock mode.
Parameters
ports <portlist> − Specifies a port or range of ports to be viewed.
Restrictions None.
Example usage:
To display the port security configuration:
DES-3026:4#show port_security ports 1-10
Command: show port_security ports 1-10
Port# Admin State Max. Learning Addr. Lock Address Mode
---- ----------- ------------------- -----------------
1 Disabled 1 DeleteOnReset
2 Disabled 1 DeleteOnReset
3 Disabled 1 DeleteOnReset
4 Disabled 1 DeleteOnReset
5 Disabled 1 DeleteOnReset
6 Disabled 1 DeleteOnReset
7 Enabled 10 DeleteOnReset
8 Disabled 1 DeleteOnReset
9 Disabled 1 DeleteOnReset
10 Disabled 1 DeleteOnReset
DES-3026:4#
162
To Next Page
Loading...
Need help?
General
