DES-3000 Series Layer 2 Switch CLI Reference Manual
To display the way that the users logged in:
DES-3026:4#show session
Command: show session
ID Login Time Live Time From Level Name
-- --------------------------- --------------- -------------- ------- -------------------
*8 2204/01/26 3:36:27 0:0:20.260 Serial Port 4 Anonymous
Total entries: 1
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show switch
Purpose Used to display information about the Switch.
Syntax
show switch
Description This command displays information about the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the Switch information:
DES-3026:4#show switch
Command: show switch
Device Type : DES-3026 Ethernet Switch
Module 1 Type : None
Module 2 Type : None
MAC Address : DA-10-21-00-00-01
IP Address : 10.41.44.22 (Manual)
VLAN Name : default
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
Boot PROM Version : Build 1.01.003
Firmware Version : Build 2.01.020
Hardware Version : 0A1
System Name : DES-3026_#3
System Location : 7th_flr_east_cabinet
System Contact : Julius_Erving_212-555-6666
Spanning Tree : Disabled
IGMP Snooping : Disabled
802.1X : Disabled
TELNET : Enabled (TCP 23)
WEB : Enabled (TCP 80)
RMON : Disabled
DES-3026:4#
13
To Next Page
Loading...
