DES-3000 Series Layer 2 Switch CLI Reference Manual
show traffic control
Purpose Used to display current traffic control settings.
Syntax
show traffic control {grouplist <storm_grouplist>}
Description This command displays the current storm traffic control configuration
on the Switch.
Parameters grouplist <storm_grouplist> - Enter a grouplist by which to view
traffic control settings.
Restrictions None.
Example usage:
To display traffic control setting for ports 1-5:
DES-3026:4#show traffic control group_list 1-5
Command: show traffic control group_list 1-5
Group Threshold Broadcast Multicast Destination
[port] (Kbit/sec) Storm Storm Lookup Fail
---------- ------------ --------------- --------------- ----------------
1 64 Disabled Disabled Disabled
2 64 Disabled Disabled Disabled
3 64 Disabled Disabled Disabled
4 64 Disabled Disabled Disabled
5 64 Disabled Disabled Disabled
Total Entries: 5
DES-3026:4#
94
To Next Page
Loading...
