DES-3000 Series Layer 2 Switch CLI Reference Manual
show stp
Purpose Used to display the Switch’s current STP configuration.
Syntax
show stp
Description This command displays the Switch’s current STP configuration.
Parameters None.
Restrictions None.
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DES-3026:4#show stp
Command: show stp
STP Status : Enabled
Max Age : 20
Hello Time : 2
Forward Delay : 15
Priority : 32768
Default Path Cost : 802.1T
STP Version : STP compatible
TX Hold Count : 3
Forwarding BPDU : Enabled
Loopback Detection: Disabled
LBD Recover Time : 60
Designated Root Bridge: 00-54-85-26-05-00
Root Priority : 4096
Cost to Root : 200004
Root Port : 19
Last Topology Change : 6sec
Topology Changes Count: 37
Protocol Specification: 3
Max Age : 20
Hello Time : 2
Forward Delay : 15
Hold Time : 3
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
78
To Next Page
Loading...
