DES-3000 Series Layer 2 Switch CLI Reference Manual
config multicast filtering_mode
Purpose Used to configure the multicast packet filtering mode for the Switch.
Syntax
config multicast filtering_mode [ forward_unregistered_groups |
filter_unregistered_groups]
Description This command will configure the multicast packet filtering mode on the
Switch.
Parameters [forward_unregistered_groups | filter_unregistered_groups] – The user may
set the filtering mode to any of these two options.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the multicast filtering mode to filter unregistered groups.
DES-3026:4#config multicast filtering_mode filter_unregistered_groups
Command: config multicast filtering_mode filter_unregistered_groups
Success.
DES-3026:4#
91
To Next Page
Loading...
