DES-3000 Series Layer 2 Switch CLI Reference Manual
create address_binding ip_mac ipaddress
Purpose Used to create an IP-MAC address binding entry.
Syntax
create address_binding ip_mac ipaddress <ipaddr>
mac_address <macaddr> { ports [ portlist | all ] }
Description This command will create an IP-MAC address binding entry.
Parameters <ipaddr> - The IP address of the device to be bound to the MAC
address stated below.
mac_address <macaddr> - The MAC address of the device to be
bound to the IP address stated above.
ports [ portlist | all ] – The port or ports bound to the IP address
and MAC address stated above.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an IP-Mac address binding entry on the Switch:
DES-3026:4#create address_binding ip_mac ipaddress 10.1.1.3
mac_address 00-00-00-00-00-04
Command: create address_binding ip_mac ipaddress 10.1.1.3
mac_address 00-00-00-00-00-04
Success.
DES-3026:4#
132
To Next Page
Loading...
