DES-3000 Series Layer 2 Switch CLI Reference Manual
enable mirror
Purpose Used to enable a previously entered port mirroring configuration.
Syntax
enable mirror
Description
This command, combined with the disable mirror command below, allows a
mirror entry to be enabled on the Switch, without modifying the port mirroring
configuration.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable mirroring configurations:
DES-3026:4#enable mirror
Command: enable mirror
Success.
DES-3026:4#
disable mirror
Purpose Used to disable a previously entered port mirroring configuration.
disable mirror
Description
This command, combined with the enable mirror command above, allows
a mirror entry to be disabled on the Switch, without modifying the port
mirroring configuration.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Syntax
Example usage:
To disable mirroring configurations:
DES-3026:4#disable mirror
Command: disable mirror
Success.
DES-3026:4#
show mirror
Purpose Used to show the current port mirroring configuration on the Switch.
Syntax
show mirror
Description This command displays the current port mirroring configuration on the
Switch.
Parameters None.
Restrictions None.
117
To Next Page
Loading...
