DES-3000 Series Layer 2 Switch CLI Reference Manual
show mac_notification ports
Purpose Used to display the Switch’s MAC address table notification status
settings
Syntax
show
mac_notification ports <portlist>
Description This command is used to display the Switch’s MAC address table
notification status settings.
Parameters <portlist> - Specify a port or group of ports to be viewed.
Entering this command without the parameter will display the MAC
notification table for all ports.
Restrictions None
Example usage:
To display all port’s MAC address table notification status settings:
DES-3026:4#show mac_notification ports
18 Disabled
20 Disabled
Command: show mac_notification ports
Port # MAC Address Table Notification State
------ -----------------------------------------------------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
11 Disabled
12 Disabled
13 Disabled
14 Disabled
15 Disabled
16 Disabled
17 Disabled
19 Disabled
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
141
To Next Page
Loading...
