DES-3000 Series Layer 2 Switch CLI Reference Manual
Example usage:
To display the parameters for a specific command:
DES-3026:4#? config igmp_snooping
Command: config igmp_snooping
Command: config igmp_snooping
Usage: [vlan_name <vlan_name 32> | all] {host_timeout <sec 1-16711450> |
router_timeout <sec 1-16711450> | leave_timer <sec 1-16711450> | state
[enabled | disabled | fast_leave [enabled | disabled]}
Description: Used to configure IGMP snooping on the switch.
config igmp_snooping querier
DES-3026:4#
show command_history
Purpose Used to display the command history.
Syntax
show command_history
Description This command will display the command history.
Parameters None.
Restrictions None.
Example usage
To display the command history:
DES-3026:4#show command_history
Command: show command_history
?
? show
show vlan
config router_ports vlan2 add 1:1-1:10
config router_ports vlan2 add
config router_ports vlan2
config router_ports
show vlan
create vlan vlan2 tag 3
create vlan vlan2 tag 2
show router_ports
show router ports
login
DES-3026:4#
dir
Purpose Used to display all commands.
Syntax
dir
Description This command will display all commands.
Parameters None.
Restrictions None.
210
To Next Page