DES-3000 Series Layer 2 Switch CLI Reference Manual
show auth_session_statistics
Purpose Used to display the current authentication session statistics.
Syntax
show
auth_session_statistics {ports [<portlist> | all]}
Description
The show auth_session statistics command is used to display
the current authentication session statistics of the Switch on a
per port basis.
Parameters
ports <portlist> − Specifies a port or range of ports to be viewed.
all – Specifies that all ports will be viewed.
Restrictions None.
Example usage:
To display the current authentication session statistics for port 16:
DES-3026:4#show auth_session_statistics ports 1
Command: show auth_session_statistics ports 1
Port number : 1
SessionOctetsRx 0
SessionOctetsTx 0
SessionFramesRx 0
SessionFramesTx 0
SessionId
SessionAuthenticMethod Remote Authentication Server
SessionTime 0
SessionTerminateCause SupplicantLogoff
SessionUserName Trinity
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
182
To Next Page
Loading...
