DES-3000 Series Layer 2 Switch CLI Reference Manual
show account
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display the accounts that have been created:
DES-3026:4#show account
Command: show account
Current Accounts:
Username Access Level
--------------- ------------
dlink Admin
DES-3026:4#
delete account
Purpose Used to delete an existing user account.
Syntax
delete account <username>
Description The delete account command deletes a user account that has been
created using the create account command.
Parameters <username>
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the user account “System”:
DES-3026:4#delete account System
Command: delete account System
Are you sure to delete the last administrator account?(y/n)
Success.
DES-3026:4#
show session
Purpose Used to display a list of currently logged-in users.
Syntax
show session
Description This command displays a list of all the users that are logged-in at
the time the command is issued.
Parameters None.
Restrictions None.
Example usage:
12
To Next Page
Loading...
