DES-3000 Series Layer 2 Switch CLI Reference Manual
18
MAC NOTIFICATION COMMANDS
The MAC notification commands in the Command Line Interface (CLI) are listed, in the following table, along with their
appropriate parameters.
Command Parameters
enable mac_notification
disable mac_notification
config mac_notification {interval <int 1-2147483647> | historysize <int 1-500>
config mac_notification
ports
[<portlist> | all] [enable | disable]
show mac_notification
show mac_notification
ports
<portlist>
Each command is listed, in detail, in the following sections.
137
To Next Page
Loading...
