D-Link DES-3026 - Switch - Delete Address_Binding; To Delete an IP-MAC Binding on the Switch

DES-3000 Series Layer 2 Switch CLI Reference Manual
delete address_binding
Purpose Used to delete an IP-MAC address binding entry.
Syntax
delete address_binding
[ip_mac [ipaddress <ipaddr> mac_address <macaddr> |
all] | blocked [all | vlan_name <vlan_name> mac_address <macaddr>]]
Description This command will delete IP-MAC address binding entries. Two methods of deletion can
be applied.
IP_MAC – Individual Address Binding entries can be deleted by entering the physical
and IP addresses of the device. Toggling to all will delete all the Address Binding entries.
Blocked – Blocked address binding entries (bindings between VLAN names and MAC
addresses) can be deleted by entering the VLAN name and the physical address of the
device. To delete all the blocked IP-MAC address binding entries, toggle all.
Parameters ip_mac – Select this parameter to delete a specific IP-MAC address binding entry by
entering the following IP-MAC address binding information.
7. ipaddress <ipaddr> - Enter the IP address of the device where the IP-MAC address
binding is made. This entry will be used in conjunction with the following MAC
address to identify the binding entry to be deleted.
8. <macaddr> The MAC address of the device where the IP-MAC address binding
entry is made. This entry will be used in conjunction with the previous IP address to
identify the binding entry to be deleted.
9. all - Entering this parameter will delete all IP-MAC address binding entries.
blocked – Entering this parameter will specify that the user wishes to delete a particular
blocked IP-MAC address entry, defined by entering the following parameters.
10. all - Entering this parameter will delete all blocked IP-MAC address binding entries.
11. vlan_name <vlan_name> Enter the VLAN name of the VLAN that is bound to a
MAC address which the user wishes to delete. This entry must be implemented
with the following parameter to specify the entry to be deleted.
12. <macaddr> The MAC address of the device where the blocked IP-MAC address
binding is made. This entry will be used in conjunction with the previous VLAN
Name to identify the binding entry to be deleted.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an IP-MAC Binding on the switch:
DES-3026:4#delete address-binding ip-mac ipaddress
10.1.1.1 mac_address 00-00-00-00-00-06
Command: delete address-binding ip-mac ipaddress
10.1.1.1 mac_address 00-00-00-00-00-06
Success.
DES-3026:4#
136