DES-3000 Series Layer 2 Switch CLI Reference Manual
enable mac_notification
Purpose Used to enable global MAC address table notification on the
Switch.
Syntax
enable mac_notification
Description This command is used to enable MAC address notification without
changing configuration.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To enable MAC notification without changing basic configuration:
DES-3026:4#enable mac_notification
Command: enable mac_notification
Success.
DES-3026:4#
disable mac_notification
Purpose Used to disable global MAC address table notification on the Switch.
Syntax
disable mac_notification
Description This command is used to disable MAC address notification without
changing configuration.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable MAC notification without changing basic configuration:
DES-3026:4#disable mac_notification
Command: disable mac_notification
Success.
DES-3026:4#
138
To Next Page
Loading...
