DES-3000 Series Layer 2 Switch CLI Reference Manual
enable sim
Used to enable Single IP Management (SIM) on the Switch
Syntax
enable sim
Description This command will enable SIM globally on the Switch. SIM features
and functions will not function properly unless this function is
enabled.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Purpose
Example usage:
To enable SIM on the Switch:
DES-3026:4#enable sim
Command: enable sim
Success.
DES-3026:4#
disable sim
Purpose Used to disable Single IP Management (SIM) on the Switch.
Syntax
disable sim
This command will disable SIM globally on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Description
Example usage:
To disable SIM on the Switch:
DES-3026:4#disable sim
Command: disable sim
Success.
DES-3026:4#
199
To Next Page
Loading...
