D-Link DES-3026 - Switch - Config 802.1 X Auth_Protocol; To Configure 802.1 X Authentication Parameters for Ports 1 - 20; To Configure the Authentication Protocol on the Switch

DES-3000 Series Layer 2 Switch CLI Reference Manual
Example usage:
To configure 802.1x authentication parameters for ports 1 – 20:
DES-3026:4#config 802.1x auth_parameter ports 1 – 20 direction both
Command: config 802.1x auth_parameter ports 1 – 20 direction both
Success.
DES-3026:4#
config 802.1x auth_protocol
Purpose Used to configure the 802.1x authentication protocol on the
Switch.
Syntax
config 802.1x auth_protocol [local | radius_eap]
Description
The config 802.1x auth_protocol command enables you to
configure the authentication protocol.
Parameters [local | radius_eap] – Specify the type of authentication protocol
desired.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the authentication protocol on the Switch:
DES-3026:4# config 802.1x auth_protocol local
Command: config 802.1x auth_protocol local
Success.
DES-3026:4#
172