DES-3000 Series Layer 2 Switch CLI Reference Manual
Example usage
To display all of the commands:
DES-3026:4#dir
Command: dir
..
?
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x capability ports
config account
config cpu access_profile profile_id
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x init
config 802.1x reauth
config arp_aging time
config command history
config dst
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
config command_history
Purpose Used to configure the command history.
Syntax
config command_history <value 1-40>
Description This command is used to configure the command history.
Parameters
<value 1-40> − The number of previously executed commands maintained
in the buffer. Up to 40 of the latest executed commands may be viewed.
Restrictions None.
Example usage
To configure the command history:
DES-3026:4#config command_history 20
Command: config command_history 20
Success.
DES-3026:4#
211
To Next Page
Loading...
