DES-3000 Series Layer 2 Switch CLI Reference Manual
show cos tos
Purpose Used to display the current ToS mapping configuration on the Switch.
Syntax
show cos tos { value <value 0-7> }
Description Use this command to view ToS mappipng for any or all ToS priority values.
Parameters value <value 0-7> - Specifies a ToS value in order to view CoS mapping configuration for
that value. If no value is specified, all eight ToS mapped values are listed.
Restrictions None.
Example usage:
To
DES-3026:4#show cos tos
Command: show cos tos
TOS value Class
---------------------------
0 0
1 0
2 0
3 2
4 0
5 0
6 0
7 0
DES-3026::4#
112
To Next Page
Loading...
