DES-3000 Series Layer 2 Switch CLI Reference Manual
Example usage:
To display the 802.1x authentication states (stacking disabled) for Port-based 802.1x:
DES-3026:4#show 802.1x auth_state ports 1-5
Command: show 802.1x auth_state ports 1-5
Port Auth PAE State Backend State Port Status
------ -------------- ------------- ------------
1 ForceAuth Success Authorized
2 ForceAuth Success Authorized
3 ForceAuth Success Authorized
4 ForceAuth Success Authorized
5 ForceAuth Success Authorized
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
Example usage:
To display the 802.1x authentication states (stacking disabled) for MAC-based 802.1x:
DES-3026:4#show 802.1x auth_state
Command: show 802.1x auth_state
Index MAC Address Auth PAE State Backend State Port Status
2
Port number : 1
------ ------------------- ----------------------- --------------------- -----------------
1 00-08-02-4E-DA-FA Authenticated Idle Authorized
3
4
5
6
7
8
CTRL+C ESC q Quit SPACE n Next Page Enter Next Entry a All
168
To Next Page
Loading...
Need help?
General
