DES-3000 Series Layer 2 Switch CLI Reference Manual
create snmp host
Encryption − scrambles the contents of messages to prevent
it being viewed by an unauthorized source.
noauth_nopriv − Specifies that there will be no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_nopriv − Specifies that authorization will be required, but there
will be no encryption of packets sent between the Switch and a
remote SNMP manager.
auth_priv − Specifies that authorization will be required, and that
packets sent between the Switch and a remote SNMP manger will
be encrypted.
<auth_sting 32>
−
An alphanumeric string used to authorize a
remote SNMP manager to access the Switch’s SNMP agent.
40
To Next Page
Loading...
