D-Link DGS-3000 series - Page 344

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
340
Example
To disable JWAC UDP filtering:
DGS-3000-26TC:admin#disable jwac udp_filtering
Command: disable jwac udp_filtering
Success.
DGS-3000-26TC:admin#
37-12 enable jwac quarantine_server_monitor
Description
This command is used to enable the JWAC quarantine server monitor. When enabled, the JWAC
switch will monitor the quarantine server to ensure the server is okay. If the Switch detects no
quarantine server, it will redirect all unauthenticated HTTP accesses to the JWAC Login Page
forcibly if the redirect is enabled and the redirect destination is configured to be quarantine server.
Format
enable jwac quarantine_server_monitor
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable JWAC quarantine server monitoring:
DGS-3000-26TC:admin#enable jwac quarantine_server_monitor
Command: enable jwac quarantine_server_monitor
Success.
DGS-3000-26TC:admin#
37-13 disable jwac quarantine_server_monitor
Description
This command is used to disable JWAC quarantine server monitoring.
Format
disable jwac quarantine_server_monitor