D-Link DGS-3000 series - Page 410

DGS-3000 Series Layer 2 Managed Gigabit Switch CLI Reference Guide
406
Parameters
password - In RADIUS mode, the Switch will communicate with the RADIUS server using this
password. The maximum length of the key is 16.
<password> - Enter the password used here. The default password is “default”.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the MAC-based Access Control password:
DGS-3000-26TC:admin#config mac_based_access_control password switch
Command: config mac_based_access_control password switch
Success.
DGS-3000-26TC:admin#
44-4 config mac_based_access_control method
Description
This command is used to configure the MAC-based Access Control authentication method.
Format
config mac_based_access_control method [local | radius]
Parameters
local - Specifies to authenticate via the local database.
radius - Specifies to authenticate via a RADIUS server.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the MAC-based Access Control authentication method as local:
DGS-3000-26TC:admin#config mac_based_access_control method local
Command: config mac_based_access_control method local
Success.
DGS-3000-26TC:admin#